6. Install the:
a) Display assembly.
b) Hinge covers
c) Heatsink
d) PCIe heatsink assembly
e) Docking port assembly
f) WWAN card
g) WLAN card
h) Bottom chassis cover
i) Batteries
7. Follow the procedure in After working inside your computer.
Microphone
Removing the Microphone
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Batteries
b) Bottom chassis cover
c) Memory
d) WLAN card
e) WWAN card
f) PCIe heatsink assembly
g) Docking port assembly
h) Heatsink
i) Hinge covers
j) Display assembly.
k) LCD bezel and back cover assembly.
3. Peel off the tape securing the microphone daughterboard[1] and remove the two 'M2*3' screws [2] to turn the daughterboard [3] up
side down.
Removing and installing components
119
To Next Page
Loading...
