3. Lock the I/O door.
4. Follow the procedure in After working inside your computer.
NOTE:
Depending on its location each door may have one, two, or three screws.
Battery
Removing the Battery
1.
NOTE:
This laptop can accommodate two hot-swap capable batteries(primary and optional), both the batteries
follows the same installation and removal procedure.
Follow the procedure in Before working inside your computer.
2. Unlock the battery [1] and slide the latch along the groove to disengage locking mechanism.
3. Pry on the recess point [2] and slide the battery forward [3] to remove it from the computer.
76
Removing and installing components
To Next Page
Loading...
