4. Install the: Batteries
5. Follow the procedure in After working inside your computer.
SSD
Removing the SSD from carrier
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Batteries.
b) SSD(Primary ).
3. Remove the two 'M2*5' screws [1] and flip over the SSD carrier [2].
4. Remove the single 'M2*5' screw [3] and separate the cover from the SSD carrier [4].
5. Separate the SSD and interposer [1] from the SSD carrier tray.
6. Flip over the assembly [2] and disconnect the SSD from the interposer [3].
80
Removing and installing components