4. Install the:
a) Bottom chassis cover
b) Batteries
5. Follow the procedure in After working inside your computer.
Primary SSD Rail
Removing the Primary SSD rail
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Batteries
b) SSD
c) Bottom chassis cover
d) PCIe heatsink assembly
3. Peel off the inductive tape on the SSD FPC connector [1] on system board and disconnect it [2].
4. Remove the 4 'M2*3' screws [3] and remove it from the computer [4].
Removing and installing components
99