2. Install the:
a. Batteries
b. Bottom Chassis Cover
3. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing the Coin cell
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Bottom chassis cover
b. Batteries
3.
NOTE:
Removing or Disconnecting the coin cell may reset systemboard / BIOS / system time to defaults or engage bit
locker or other similar security protocol devices.
Disconnect the coin cell connector from the system board [1] and remove it from the system [2].
100
Removing and installing components
To Next Page
Loading...
