Microphone
Removing the Microphone
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
c. Memory
d. WLAN card
e. WWAN card
f. PCIe heatsink assembly
g. Docking port assembly
h. Heatsink
i. Hinge covers
j. Display assembly.
k. LCD bezel and back cover assembly.
3. Peel off the tape securing the microphone daughterboard[1] and remove the two 'M2*3' screws [2] to turn the
daughterboard [3] up side down.
4. Peel off the insulation tape [1] and disconnect the EDP cable connectors [2].
126
Removing and installing components
To Next Page
Loading...
