Dell Latitude 5424 Rugged - Camera; Removing the Camera

4. Install the:
a. LCD with bezel assembly.
b. Display assembly.
c. Hinge covers
d. Heatsink
e. PCIe heatsink assembly
f. Docking port assembly
g. WWAN card
h. WLAN card
i. Bottom chassis cover
j. Batteries
5. Follow the procedure in After working inside your computer.
Camera
Removing the Camera
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
c. Memory
d. WLAN card
e. WWAN card
f. PCIe heatsink assembly
g. Docking port assembly
h. Heatsink
i. Hinge covers
j. Display assembly.
k. LCD Bezel and back cover assembly.
3. Peel off the reflective tape[1] on camera module and the insulation tape securing the EDP cable[2] to camera module.
4. Disconnect the EDP cable from the camera module [3] and remove the two 'M2*3' screws [4].
128
Removing and installing components