d. Heatsink
e. PCIe heatsink assembly
f. Docking port assembly
g. WWAN card
h. WLAN card
i. Bottom chassis cover
j. Batteries
5. Follow the procedure in After working inside your computer.
Battery Bay
Removing the Battery bay
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
c. PCIe Heatsink assembly
3.
CAUTION: Use extreme caution when removing cable due to the very limited space cable could be easily
pinched or bent leading to cable damage.
Disconnect both the battery connections from the system board.
4. Remove the five 'M2.5*5' [1] and nine 'M2.5*3' [2] screws securing the battery bay to chassis and lift to separate the
battery bay [3] from the computer.
130
Removing and installing components
To Next Page
Loading...
