5. Install the:
a. SSD(Primary or Secondary).
b. Batteries
6. Follow the procedure in After working inside your computer.
HDD carrier
Removing the Hard Drive carrier
1. Follow the procedure in Before working inside your computer.
2. Remove the: Batteries.
3. Press the blue latch [1] and slid the HDD carrier out of the slot on the system [2]
4.
NOTE:
Depending on the configuration ordered the system may have a Hard Drive or a Solid State Drive in the carrier.
The installation and removal procedure remains same.
Remove the six screws [1] and lift the cover from the top of the carrier [2].
5. Remove the single screw [3] and slid the SSD out of the carrier [4].
Removing and installing components
85