Dell Latitude 5424 Rugged - Removing and Installing Components; Safety Instructions and ESD Protection

Bottom Chassis Cover
Removing the Bottom Chassis Cover
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries.
3. Unlock [1] and open the left, right, and rear I/O door [2].
4.
Remove the 19 'M2.5*5' screws on the bottom chassis cover [1], two 'M2.5*6' screws [2] in the rear I/O space.
5. Remove the bottom chassis cover [3] from the computer.
Removing and installing components
87