Primary SSD carrier
Removing the Primary SSD carrier
1 Follow the procedure in Before working inside your computer.
CAUTION: Attempt to retrieve the primary SSD carrier from an operational computer can cause operating system crash
and potential data loss.
2 Remove the: Batteries.
3 Release the SSD carrier by sliding the blue hard drive release latch [1] towards right.
4 Slide the SSD carrier out of the computer using the blue pull tab [2] out of the computer.
Installing the Primary SSD carrier
1 Insert the primary SSD carrier [1] in to the computer.
2 Push the carrier into the slot until the blue tab clicks and close the right I/O door [2].
114
Removing and installing components