Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
4. Remove the keyboard.
5. Remove the base cover.
6. Remove the Wi-Fi I/O board.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the dock I/O board.
10. Remove the rear I/O board.
11. Remove the fan.
12. Remove the heat-sink (UMA) or heat-sink (discrete).
13. Remove the system board.
14. Remove the display bezel.
15. Remove the camera.
16. Remove the display hinges.
17. Remove the display cable.
About this task
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
Figure 1. Touch screen - Full antenna
Removing and installing components
103
To Next Page
Loading...
