9. Keyboard 10. Palm-rest assembly
11. Speaker 12. Display assembly
13. Coin-cell battery 14. LED board
15. Power button with fingerprint reader 16. Secondary daughterboard
17. Primary solid-state drive 18. Power-button board
19. WiFi I/O board 20. Right Type-C daughterboard
21. WWAN module
NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These
parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative for
purchase options.
Battery
Lithium-ion battery precautions
CAUTION:
● Exercise caution when handling Lithium-ion batteries.
● Discharge the battery completely before removing it. Disconnect the AC power adapter from the system and
operate the computer solely on battery power—the battery is fully discharged when the computer no longer
turns on when the power button is pressed.
● Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
● Do not expose the battery to high temperatures, or disassemble battery packs and cells.
● Do not apply pressure to the surface of the battery.
● Do not bend the battery.
● Do not use tools of any kind to pry on or against the battery.
● Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental
puncture or damage to the battery and other system components.
● If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing,
bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical
support for assistance. See www.dell.com/contactdell.
● Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers.
● Swollen batteries should not be used and should be replaced and disposed properly. For guidelines on how to
handle and replace swollen Lithium-ion batteries, see Handling swollen Lithium-ion batteries.
Removing the batteries
Prerequisites
1. Follow the procedure in before working inside your computer.
About this task
NOTE:
Latitude 5430 Rugged can accommodate two hot-swap capable batteries (Primary and optional). The removal
procedure of the primary and optional battery are identical.
The following images indicate the location of the battery and provide a visual representation of the removal procedure.
16
Removing and installing components
To Next Page
Loading...
