Steps
1. Place the keyboard on the system chassis.
2. Connect the keyboard and backlight flexible printed cables to the connectors on the system board.
Adhere the keyboard and backlight flexible printed cable with kapton tapes to the connectors.
3. Replace the four (M2x3.5) screws that secure the keyboard cover to the system chassis.
4. Flip the keyboard on the chassis and slide it towards the display to align with the screw holes.
5. Replace the four (M2.5x4) screws to secure the keyboard.
Next steps
1. Install the battery.
2. Follow the procedure in after working inside your computer.
Removing the keyboard (standard)
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the battery.
About this task
The following images indicate the location of the keyboard and provide a visual representation of the removal procedure.
Removing and installing components
33
To Next Page
Loading...
