Dell Latitude 5430 Rugged - WWAN Card; Removing the WWAN Card

Table 5. Connectors on the wireless card
Antenna Cable Color
Main (white triangle) White (cable number 13)
Auxiliary (black triangle) Black (cable number 3)
3. Place the WLAN card holder on the WLAN card.
4. Replace the (M2x3.5) screw to secure the WLAN card holder to the WLAN card.
Next steps
1. Install the Wi-Fi I/O board.
2. Install the base cover.
3. Install the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
4. Install the battery.
5. Follow the procedure in after working inside your computer.
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
4. Remove the base cover.
About this task
The following images indicate the location of the WWAN card and provide a visual representation of the removal procedure.
Removing and installing components
47