Steps
1. Align the screw hole on the left hinge with the screw hole on the display back cover.
2. Replace the two screws (M2.5x3) to secure the left hinge to the display back cover.
3. Align the screw hole on the right hinge with the screw hole on the display back cover.
4. Replace the two screws (M2.5x3) to secure the right hinge to the display back cover.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the WLAN card.
5. Install the WWAN card.
6. Install the base cover.
7. Install the microSIM card.
8. Install the microSD card.
9. Follow the procedure in after working inside your computer.
Removing and installing components
79
To Next Page
Loading...
