Dell Latitude 5480 - Installing Display Hinge

2. Remove the:
a. base cover
b. battery
c. WWAN card (optional)
d. WLAN card
e. display hinge cover
f. display assembly
g. display bezel
3. To remove the display hinge:
a. Remove the M2.5*3 screws that secure the display hinge to the display assembly [1].
b. Lift the display hinge away from the display assembly [2].
c. Repeat step a and step b to remove the other display hinge.
Installing display hinge
Steps
1. Place the display hinge on the display assembly.
2. Tighten the M2.5*3 screws to secure the display hinge to the display assembly.
3. Repeat step 1 and step 2 to install the other display hinge.
4. Install the:
a. display bezel
b. display assembly
c. WLAN card
d. WWAN card(optional)
e. battery
f. base cover
50
Removing and installing components