a. battery
b. base cover
5. Follow the procedures in After working inside your system.
Coin-cell battery
Removing the coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the :
a. base cover
b. battery
3. To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the connector on the system board [1].
b. Lift the coin cell battery to release from the adhesive and lift it away from the system board [2].
Installing coin cell battery
1. Affix the coin cell battery on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
3. Install the :
a. battery
b. base cover
4. Follow the procedure in After working inside your computer.
Removing and installing components
19
To Next Page
Loading...
