Installing display hinge
1. Place the display hinge on the display assembly.
2. Replace the 3 (M2.5x3) screws to secure the display hinge to the display assembly.
3. Repeat step 1 and step 2 to install the other display hinge.
4. Install the:
a. display hinge cover
b. display bezel
c. display assembly
d. WLAN card
e. WWAN card (optional)
f. battery
g. base cover
5. Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
Removing and installing components
51
To Next Page
Loading...
