Dell Latitude 5490 - Palm Rest

b. battery
c. WLAN card
d. WWAN card (optional)
e. display hinge cover
f. display assembly
g. display bezel
h. display panel
i. display hinge
j. display cable
k. camera
The display back cover assembly is the remaining component, after removing all the
components.
Installing the display back cover assembly
1. Place the display back cover assembly on a flat surface.
2. Install the:
a. camera
b. display cable
c. display hinge
d. display panel
e. display bezel
f. display assembly
g. display hinge cover
h. WLAN card
i. WWAN card (optional)
j. battery
k. base cover
3. Follow the procedure in After working inside your computer.
Palm rest
Removing palm rest
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. SIM card
b. base cover
c. battery
52
Removing and installing components