a Pry the clips securing the memory module until the memory module pops-up [1].
b Lift the memory module from the connector [2].
Installing the memory module
1 Insert the memory module into the memory connector at a 30 degree angle until the contacts are fully seated into the slot. Then, press
the module until the clips secure the memory module.
2 Install the :
a battery
b base cover
3 Follow the procedure in After working inside your computer.
Keyboard
Removing keyboard lattice
1 Follow the procedure in Before working inside your computer.
2 Pry the keyboard lattice from one of the recess points [1] and continue prying the sides in clockwise or anticlockwise direction, and
then lift the keyboard lattice from the system [2]
26
Disassembly and reassembly
To Next Page
Loading...
