Installing the heat sink
1 Place the heat sink on the system board.
2 Replace the four (M2x3) screws that secure the heat sink on the system board.
NOTE
:
• Replace the heat sink screws in sequential order as indicated on the heat-sink.
3 Install the :
a battery
b base cover
4 Follow the procedure in After working inside your computer.
System fan
Removing the system fan
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c hard drive
d SSD card
e SSD frame
f WLAN card
g WWAN card (optional)
Disassembly and reassembly
31
To Next Page
Loading...
