3 Place the Mylar shield over the SSD.
4 Install the :
a battery
b base cover
5 Follow the procedure in After working inside your computer.
Removing the SSD frame
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c SSD card
3 To remove the SSD frame:
a Remove the M2x3 screw that secures the SSD frame to the system [1].
b Lift the SSD frame from the system [2].
Installing the SSD frame
1 Place the SSD frame into the slot in the system.
2 Replace the M2x3 screw that secures the SSD frame to the system.
3 Install the:
a SSD card
Disassembly and reassembly
17