Installing display hinge
1 Place the display hinge on the display assembly.
2 Replace the 3 (M2.5x3) screws to secure the display hinge to the display assembly.
3 Repeat step 1 and step 2 to install the other display hinge.
4 Install the:
a display hinge cover
b display bezel
c display assembly
d WLAN card
e WWAN card (optional)
f battery
g base cover
5 Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display hinge cover
f display assembly
g display bezel
h display panel
i display hinge
j display cable
k camera
The display back cover assembly is the remaining component, after removing all the components.
60
Disassembly and reassembly
To Next Page
Loading...
