Installing the display back cover assembly
1 Place the display back cover assembly on a at surface.
2 Install the:
a camera
b display cable
c display hinge
d display panel
e display bezel
f display assembly
g display hinge cover
h WLAN card
i WWAN card (optional)
j battery
k base cover
3 Follow the procedure in After working inside your computer.
Palm rest
Removing palm rest
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a SIM card
b base cover
c battery
d memory module
e hard drive
f SSD card
g SSD frame
h WLAN card
i WWAN card (optional)
j keyboard lattice
k keyboard
l heat sink assembly
m chassis frame
n system board
o display hinge cover
p display assembly
3 The palm rest is the remaining component after removing all the components.
Disassembly and reassembly
61
To Next Page
Loading...
