Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the touchpad.
3. Install the DC-in port.
4. Install the power button with fingerprint reader.
5. Install the display assembly.
6. Install the speakers.
7. Install the LED board.
8. Install the memory module.
9. Install the inner frame.
10. Install the WWAN card.
11. Install the WLAN card.
12. Install the HDD.
13. Install the solid state drive.
14. Install the battery.
15. Install the base cover.
16. Follow the procedure in After working inside your computer.
Disassembly and reassembly
93
To Next Page
Loading...
