Steps
1. Push the dummy sim card out of the sim card slot [1, 2].
2. Lift the latch and disconnect the following cables from the system board:
a. LED board cable [3].
b. USH FFC [4].
c. Touchpad FFC [5].
3. Remove the two (M2x3) screws that secure the eDP bracket to the system board [1].
4. Remove the eDP bracket away from the computer [2].
5. Lift the eDP cable from the connector on the system board [3].
76
Disassembly and reassembly
To Next Page
Loading...
