Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the WWAN card.
3. Install the WLAN card.
4. Install the battery.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.
Hinge caps
Removing the hinge caps
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
About this task
The figure indicates the location of the hinge caps and provides a visual representation of the removal procedure.
114
Disassembly and reassembly
To Next Page
Loading...
