3 Lift the base cover away from the computer.
GUID-921F1F97-6EBE-4B02-A16E-C036C410C5AC
Installing the base cover
1 Align the base cover with the screw holders on the computer.
2 Press the edges of the cover until it clicks into place.
3 Tighten the M2x5 screws to secure the base cover to the computer.
4 Follow the procedure in After working inside your computer.
GUID-2F290758-2CFF-42C3-A93C-DC0EF3A54A0F
Battery
GUID-BF6DB8C1-8591-4D08-936D-8351B682BD1E
Removing the battery
NOTE: 92 WHr battery supports only SSD card and USB Type-C port, and cannot support 2.5–inch drive.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover
.
3 To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Remove the M2x5 screw that secures the battery to the computer [2].
c Lift the battery away from the computer [3].
Removing and installing components 13
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
To Next Page
Loading...
