Dell Latitude 5580 - Power connector port

GUID-6EC98990-8BB0-4ADE-87C4-7B7DFD6B62A1
Installing the system fan
1 Place the system fan on the system board and align it with the screw holders.
2 Tighten the M2.0x3.0 screws to secure the heat sink to the system board.
3 Connect the fan cable to the connector on the system board.
4 Install the:
a battery
b base cover
5 Follow the procedure in After working inside your computer.
GUID-533F671B-CE7F-422E-AF5B-742BAE7BCF2F
Power connector port
GUID-9E70A62D-E41B-482D-B42E-AD6F0B330B96
Removing the power connector port
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the power connector port:
a Disconnect the power connector port cable from the connector on the system board [1].
b Remove the M2.0x3.0 screw to release the metal bracket that secures the power connector port [2].
c Remove the metal bracket that secures the power connector port [3].
d Lift the power connector port away from the computer [4].
28 Removing and installing components
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.