GUID-4C90CBBE-3F85-45F3-9692-22DB2464F5CA
Installing the LED board
1 Place the LED board on the computer.
2 Tighten the M2.0x3.0 screw to secure the LED board to the computer.
3 Connect the LED board cable to the connector on the LED board.
4 Install the:
a chassis frame
b SSD card
or
hard drive
c WWAN card
d WLAN card
e battery
f base cover
5 Follow the procedure in After working inside your computer.
GUID-A72BE8BB-F2EE-4C6A-A2FE-38F3BD47692A
Speaker
GUID-17F4ABF5-C33C-42A7-B488-0939D3BCC4BA
Removing the speaker
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card
e SSD card
or
hard drive
f chassis frame
3 To disconnect the cables:
NOTE: Speaker cables are disconnected to remove the chassis frame.
a Lift the latch and disconnect the LED board cable [1].
b Disconnect and unroute the speaker cable [2].
Removing and installing components 41
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.