Memory modules
Removing the memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the memory module:
a Press the clips securing the memory module until the memory pops-up [1].
b Pull the memory module from the connector on the system board [2].
Installing the memory module
1 Insert the memory module into the memory module socket until the clips secure the memory module.
NOTE
: Ensure to insert the memory module at an angle NOT more than 30°. Press the memory module down to engage the
retaining clips.
2 Install the:
a battery
b base cover
3 Follow the procedures in After working inside your computer.
Removing and installing components
23
To Next Page
Loading...
