b Lift the latch and disconnect the keyboard backlight cable from the connector on the system [2].
NOTE: Number of cables to disconnect is based on the keyboard type.
c Lift the latch and disconnect the cable from the connector on the system board [3].
d Lift the latch and disconnect the cable from the connector on the system board [4].
e Turn over the system and open the laptop in working mode.
f Remove the M2 x 2 (6) screws that secure the keyboard to the system [1].
g Pry the keyboard from the bottom side and lift it away from the system [2] along with the keyboard cable and the keyboard back
light cable.
WARNING
: Gently pull the keyboard cable and the keyboard back light cable routed under the system to avoid damage
to the cables.
Removing and installing components 25
To Next Page
Loading...
