Dell Latitude 5590 - Display Back Cover Assembly

Installing camera
1 Insert the camera into the slot on the display assembly.
2 Connect the display cable to the connector.
3 Ax the two conductive tape above the camera.
4 Install the:
a display panel
b display bezel
c display assembly
d WLAN
e WWAN
f memory module
g battery
h base cover
5 Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover assembly
These instructions are applicable only for a non-touch screen.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e display assembly
f display bezel
g display panel
h eDP cable
i camera
3 The display back cover assembly is the remaining component, after removing all the components.
Installing the display back cover assembly
These instructions are applicable only for a non-touch screen.
1 The display back cover assembly is the remaining component, after removing all the components.
2 Install the:
a camera
b eDP cable
c display panel
d display bezel
e display assembly
f WWAN card
g WLAN card
h battery
54
Removing and installing components