Solid State Drive
Installing the Solid State Drive
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover:
a Loosen the M2.5x5 (8) captive screws that secure the base cover to the system [1].
b Pry the base cover from the recess at the top edge [2] and continue prying throughout the outer sides of the base cover in
clockwise direction to release the base cover.
NOTE: Use a plastic scribe to pry the base cover from the edges.
c Lift the base cover from the system.
2
8 Solid State Drive
To Next Page
Loading...
