NOTE: Non Touch - Peel oî the adhesive tape that is placed above the SSD card and remove the screw
(1).
b Remove the SSD that secures the SSD card to the system board .
c Lift and pull the SSD card from the laptop [3].
NOTE: For models shipped with NVMe SSDs, remove the thermal plate placed over the SSD.
4 To remove the SSD clip -Touch and Non-touch :
a Remove the M2x3 screw that secures the SSD clip to the laptop [1].
b Lift the SSD clip away from the laptop [2].
18
Disassembly and reassembly
To Next Page
Loading...
