b Pull the memory module from the connector on the system board [2].
Installing the memory module
1 Insert the memory module into the memory module socket then press downward until the clips secure the memory module.
NOTE
: Ensure to insert the memory module at an angle NOT more than 30°. Press the memory module down to engage the
retaining clips.
2 Install the:
a battery
b base cover
3 Follow the procedures in After working inside your computer.
Keyboard
Removing keyboard lattice
1 Follow the procedure in Before working inside your computer.
2 Pry the keyboard lattice from one of the recess points [1] and lift the lattice from the system [2].
NOTE
: Gently pull or lift keyboard lattice in clockwise or anticlockwise direction to avoid breakage.
Disassembly and reassembly 25
To Next Page
Loading...
