Removing and installing components
Topics:
• Recommended tools
• Screw size list
• Subscriber identication module card
• Base cover
• Battery
• PCIe solid state drive
• Speaker
• Coin cell battery
• WWAN card
• WLAN card
• Memory modules
• Heat sink
• LED board
• Touchpad buttons board
• Power connector port
• Display Assembly
• Display Bezel
• Display hinge
• Display panel
• Camera
• System board
• Keyboard
• Palm rest
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE
: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
2
6 Removing and installing components
To Next Page
Loading...
