Steps
1. Disconnect the speaker cable from the connector on system board.
2. Lift the speakers along with the cable off the system board.
Installing the left speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the left speaker and provides a visual representation of the installation procedure.
]
Steps
1. Align and place the speakers in its slot on the system board.
2. Reconnect the left speaker cable to the connector on the system board.
Next steps
1. Install the display assembly.
2. Install the SIM tray.
3. Follow the procedure in After working inside your computer.
Removing and installing components
27
To Next Page
Loading...
