Installing the front-facing camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the front-facing camera module and provides a visual representation of the
installation procedure.
Steps
1. Align and place the front-facing camera into the slot on the display back cover.
2. Gently press the edges of the front-facing camera and seat it in place
Next steps
1. Install the microphone modules.
2. Install the display assembly.
3. Install the SIM tray.
4. Follow the procedure in After working inside your computer.
Kick stand
Removing the Kick stand
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray.
3. Remove the display assembly.
36
Removing and installing components
To Next Page
Loading...
