Steps
1. Align the screw holes on the kick stand hinges with the screw holes on the frame.
2. Replace the six (M2x2) screws that secure the Kick stand hinges to the frame.
Next steps
1. Install the kick stand.
2. Install the display assembly.
3. Install the SIM card.
4. Follow the procedure in After working inside your computer.
Docking connector
Removing the docking connector
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray.
3. Remove the display assembly.
About this task
The following images indicate the location of the docking connector and provide a visual representation of the removal
procedure.
40
Removing and installing components
To Next Page
Loading...
