Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 30. Screw list
Component Screw type Quantity Screw image
Base cover Captive screw 8
M.2 SSD shielding cover M2x3 1
Solid-state drive M2x4 1
WWAN bracket M2x3 1
3-cell battery Captive screw
M2x4
1
4
4-cell battery Captive screw
M2x4
1
4
Fan M2x4 1
Heat-sink Captive screw 4
5G WLAN bracket M2x3 1
WLAN-antenna module bracket M2x3 4
EDP-cable bracket M2x3 2
Camera-cable bracket M2x3 2
Display hinges M2.5x5 4
Smart-card reader M2x2 4
System board M2x4 1
Working inside your computer 41
To Next Page
Loading...
