NOTE: For instructions on how to find your computer's International Mobile Station Equipment Identity (IMEI) number,
search in the Knowledge Base Resource at www.dell.com/support.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers for mainstream
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following image indicates the location of the main speakers and provides a visual representation of the removal procedure.
Figure 25. Removing the speakers
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Peel the tape that secures the speaker cable to the palm-rest and keyboard assembly.
3. Note the speaker cable routing, and unroute the speaker cable from the routing guides on the palm-rest and keyboard
assembly.
4. Lift the speakers, along with the cable, off the palm-rest and keyboard assembly.
Removing and installing Customer Replaceable Units (CRUs)
57
To Next Page
Loading...
