3 Follow the procedure in After working inside your computer.
RTC is located on the system board and hence system board must be installed after the installation of the RTC.
Keyboard
Removing keyboard assembly
NOTE: The keyboard and the keyboard tray together are called the keyboard assembly.
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Micro SD
b SIM card tray
NOTE: SIM Card tray is available only if your computer is shipped with a WWAN card.
c base cover
d battery
e SSD card
f WLAN card
g WWAN card
h Heatsink assembly
i system board
3 Peel and disconnect the cables:
a LED board cable [1]
b SSD thermal pad [2]
c keyboard and backlit keyboard cables [3]
4 To remove the keyboard:
a Remove the M2.0 x 3.0 screws that secure the keyboard to the chassis [1].
Removing and installing components
31
To Next Page
Loading...
