Nontouch display panel
Removing the display panel (nontouch)
NOTE: The display panel removal procedure is applicable only for nontouch display configuration.
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a. base cover
b. battery
c. WLAN card
d. WWAN card
e. display assembly
f. display bezel
g. hinge caps
3. To remove the display panel:
a. Remove the two (M2.0 x 2.0) screws on the panel [1].
b. Lift the bottom edge of the display panel [2].
c. Slide the display panel away from the system from the bottom [1], and flip the display panel over [2].
Disassembly and reassembly
35
To Next Page
Loading...
