Display Hinge Caps
Removing the display hinge cap
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a. base cover
b. battery
c. WLAN card
d. WWAN card
e. display assembly
3. Slide hinge cap from left to the right to release and remove the display hinge cap from the display panel.
Installing the display hinge cap
1. Place the display hinge cap on the slot and slide it back to fit on the display assembly.
2. Install the:
a. display assembly
b. WLAN card
c. WWAN card
d. battery
e. base cover
3. Follow the procedure in After working inside your computer.
Removing dummy SIM card tray
For models shipped with a WWAN card, the SIM card tray must first be removed from the system before removing the system
board. To remove the SIM card tray from the system, follow the steps outlined in the disassembly section of the Field Service
Disassembly and reassembly
39
To Next Page
Loading...
