Steps
1. Insert the SIM-card removal pin into the release hole to release the SIM-card tray.
2. Push the pin to disengage the lock, and eject the SIM-card tray.
3. Slide the SIM-card tray out of the slot on the system.
4. Remove the Micro-SIM from the SIM-card tray.
5. Slide the SIM-card tray back into the slot on the system.
Installing the SIM-card tray
Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
The following images provide a visual representation of the SIM-card tray installation procedure.
14
Removing and installing components
To Next Page
Loading...
