Dell Latitude 9330 - Solid-State Drive; Removing the M.2 2230 Solid-State Drive

Steps
1. Align and place the battery on the palm-rest and keyboard assembly.
2. Replace the five (M2x3.5) screws to secure the battery to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
M.2 solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the M.2 2230 solid-state drive and provide a visual representation of the removal
procedure.
22
Removing and installing components