Next steps
1. Install the battery.
2. Install the WWAN card.
3. Install the base cover.
4. Install the SIM card.
5. Follow the procedure in After working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the WWAN card.
5. Remove the battery.
6. Remove the solid-state drive.
7. Remove the heat sink.
About this task
The following images indicate the location of the system board assembly and provide a visual representation of the removal
procedure.
Removing and installing components
43
To Next Page
Loading...
