About this task
Next steps
1. Install the keyboard.
2. Install the power button.
3. Install the WLAN-antenna module.
4. Install the system board.
5. Install the right speaker.
6. Install the left speaker.
7. Install the heat sink.
8. Install the fan.
9. Install the battery.
10. Install the display assembly.
11. Install the WWAN card.
12. Install the solid-state drive.
13. Install the base cover.
14. Install the SIM card.
15. Follow the procedure in After working inside your computer.
Palmrest
Palm-rest
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the solid-state drive.
5. Remove the WWAN card.
6. Remove the display assembly.
7. Remove the battery.
54
Removing and installing components